In addition, it's good practice to buy around 80% of what you think you are. One gallon of any BEHR paint is enough to cover 250 to 400 square feet of surface with a single coat. An average-sized garage of 2 to 3 cars would need 7 gallons to paint walls and ceilings in a single color. Garages usually have bare drywall and are all open spaces that absorb paint very quickly.
A package of moldings in a 2500 square foot home would normally contain about 7 gallons of molding paint. Spraying walls or moldings always requires more paint, since a small percentage is lost if it is sprayed excessively and loaded and cleaned. To calculate the amount of paint needed, divide the total square footage of your house by your chosen paint coverage rate. This will give you the number of gallons of paint you need for one coat.
Keep in mind that you'll likely need more than one coat of paint to achieve full coverage, so multiply the number of gallons needed for a coat by the number of coats you plan to apply. It's important to buy enough paint to complete the project, without leaving a large amount of product left over. Wood cladding is the most expensive exterior and takes longer to paint because it has to be sanded and scraped until it is completely smooth, a vital process for obtaining a quality finished product. In this way, much more paint is used directly where it is sprayed and a weak and irregular layer is left on the edges of the fan.
However, sometimes you don't have time to go to the paint store twice and you have to take a leap of faith. He quickly realized that he was going to lose money because he ordered 5 gallons for the 4 doors, 40 gallons for the body and 10 gallons for the molding. Also, if your house has a lot of moldings or decorative elements, you'll need more paint to cover those areas. Cheaper paints aren't designed to last, so in a short time, chips, discoloration and other damage can occur, requiring you to repaint your house.
So in the next 2500 square foot house I simply ordered 2 gallons less to make sure I wouldn't have any paint left over. It is necessary to rent equipment while painting for safety reasons, as well as to help the process run smoothly and efficiently. For example, a high-quality latex paint can have a coverage rate of 400 square feet per gallon, while a lower-quality paint can only cover 250 square feet per gallon. This may not happen at first, but if you talk to your manager and let them know how important it is that you don't wait for them to give you paint, they will understand it and make it work for you you.